Home of FTP client

sitemaphomecontact us

ReMapPro Version 2.8

Date: February 12, 2007

Labtam is pleased to present a new software update for ReMapPro, now Version 2.8. It is the first major release for the 2007 year.

The main utility, the Comport, is included in the ReMapPro package which makes serial (RS232) data from your PC available on TCP/IP-based networks and makes TCP/IP data available on serial ports on your PC. This makes it possible for any other computer on the same network to send and receive serial data through a remote serial port on the PC where the Comport is running. You can connect to the remote serial port by connecting to a TCP/IP port. The Comport can also be used to pass the serial data across a corporate intranet or over the Internet. The Comport allows multiple sessions to run simultaneously but each with a different serial port.

The Comport supports full two-way I/O for full control of serial instruments (i.e. any instrument that you can plug into the serial port (RS232, RS422 or RS485) of your PC). Typical devices include most serial devices like gauges, scales and balances, sensors, micrometers, calipers, bar code scanners, densitometers, laboratory instruments, electronic balance or electronic measuring instrument, RF equipment, communication systems, etc...

NOTES on this release (PLEASE READ):

1) Use the "setup -wauto -s" command line (instead of "setup -auto") to start the "Silent Installation"!

New Features on this release include:

1. Comport and Comserv:
- Implemented the "SYNC" data transfer mode for Virtual COM ports.
- Implemented IPv6 support. In the Client mode, the software automatically negotiates on which protocol to use (IPv4 or IPv6). In the Server mode, you specify the protocol to use.
- You can select one of three modes for RTS flow control if "Flow control" in the Serial Setting is set to "None".

2. Virtual COM port Driver:
- Is operational under MS Windows 2003/XP x64 systems.
- Implemented the "SYNC" data transfer mode to provide "more natural" serial ports emulation.

The following bugs have been fixed:

1. Comport and Comserv:
- Some minor bugs were fixed.

Please read more about ReMapPro in product home section of Labtam Inc site.

Single User licenses are at $100.00 USD. Please visit the Software Pricing page for pricing on Multiple Licenses.

If at anytime you require any information or assistance please do not hesitate to e-mail us at:sales@Labtam-inc.com

Download and try ReMapPro software for FREE. (30 day trial version.)


The programs associated in this package may send and/or receive broadcast IP requests. Since such packets cannot cross the nearest firewall/gateway/router, please be sure that these IP requests are invisible from outside your network. We assume that such behavior cannot be considered as "Hacking" or "Trojan horse's action".

Home | Product | Download | Order Now | Upgrade | Support | Pricing | Company Information | Contact Us

Labtam Copyright 1999 - 2003 LabtamTM Inc.